Scoreboard goes blank during operation, an audible beep is heard from the MPCW-7, or MPCW-7 seems to reboot itself.
Give an introduction to the topic of this How-to article. For example, let's consider that this article explains how to use article template
Verifying Revision and Internal Battery Status
Step 1: Cycle power to MPCW-7 observing the boot up screen
- The screen should read "Nevco MPC-7 RXX"
Step 2: If the underline section reads "BATT", "R29", or a value less than 29
- The controller will need to be sent in for repair
Print out the attached form, fill it out, and send in with your controller
Step 3: If you need further assistance or your controller does not meet this criteria
- Reply to this email that you need further assistance and with photos of your issue if possible